How do I update the firmware on an Intel DC SSD?

Giải pháp này đã được các khách hàng của chúng tôi xác minh trong việc khắc phục vấn đề liên quan đến các biến môi trường này

Xác nhận

Xử lý sự cố

000027933

22/05/2019

What are you seeing?

How to update the firmware on datacenter SSD?


How to fix it:

Use the Intel® SSD Data Center Tool to update the firmware on a Data Center SSD in order to update the firmware of the solid state drive

  1. Run the Command Prompt as administrator
  2. Navigate to the directory where you installed the tool (C:\isdct, by default). You may use this command to get there: cd c:\isdct
  3. Identify your SSD, run this command: isdct.exe show -intelssd
  4. Update, run this command: isdct.exe load -intelssd X (where X is the index of the SSD you want to update)

User and Install Guides for Intel® SSD Data Center Tool

THE INFORMATION IN THIS ARTICLE HAS BEEN USED BY OUR CUSTOMERS BUT NOT TESTED, FULLY REPLICATED, OR VALIDATED BY INTEL. INDIVIDUAL RESULTS MAY VARY. ALL POSTINGS AND USE OF THE CONTENT ON THIS SITE ARE SUBJECT TO THE TERMS AND CONDITIONS OF USE OF THE SITE.