BIOS Update and Recovery Instructions for Intel® NUC

1. Download and save the Express BIOS update file (.msi) to a temporary directory on the target computer. Example:

   

2. Double-click the *.msi file to run the Express BIOS update.

   

3. Click Restart and Install BIOS on the Welcome screen.

   

4. Upon restart, you'll see the BIOS update process status window. Do NOT at any time power off the computer at this stage.
5. When the BIOS update is complete, the computer will start Windows.

The F7 BIOS Flash Update allows you to update the system BIOS during the start process and before the operating system loads.

1. Download the Recovery BIOS (.bio) file. Example:

   

2. Copy the .bio file to a USB device.
3. Plug the USB device into a USB port of the target computer.
4. Shut down the target computer.
5. During start, when the F7 prompt is displayed, press F7 to enter the BIOS Flash Update tool.
6. Select the USB device and press Enter.

   

7. Select the .bio file and press Enter.

   

8. Confirm you want to update the BIOS by pressing Enter.
9. Wait 2-5 minutes for the update to complete.

   

10. Remove the USB device.
11. Restart the computer.

The Power Button Menu Update allows you to update the system BIOS during the start process and before the operating system loads.

1. Download the Recovery BIOS (.bio) file. Example:

   

2. Copy the *.bio file to a USB device.
3. Plug the USB device into a USB port of the Intel NUC when it's turned off (not in Hibernate or Sleep mode).
4. Press the power button and hold it down for three seconds, then release it before the 4-second shutdown override. The Power Button Menu appears. (Options on the menu can vary, depending on the Intel NUC model.)

   

5. Press F7 to start the update.
6. Wait 2-5 minutes for the update to complete.

   

7. The computer will either turn off when the update is complete, or it will prompt you to turn it off.
8. Remove the USB device.
9. Restart the computer.

The iFlash BIOS update utility allows you to update the BIOS from the command prompt of a bootable USB device.

1. Download the iFlash BIOS Update file (*.BI.zip). Example:

   

2. Double-click the *BI.zip to extract its files.

   

3. Copy IFLASH2.exe and the .bio file to the bootable USB device.
4. Configure the BIOS of the target computer to boot to the USB device:
   1. Press F2 during boot to enter BIOS Setup.
   2. Go to the Boot menu.
   3. Enable USB Boot.
   4. Press F10 to save and exit the BIOS Setup.
5. Boot the target computer with the USB device connected.
6. At the prompt, type IFLASH2 /PF XXX.bio, where XXX.bio is the filename of the .bio file and press Enter.
7. Follow all prompts.

The UEFI Flash BIOS update utility allows you to update the BIOS from the EFI Shell.

1. Download the UEFI Flash BIOS Update file (*.UEFI.zip). Example:

   

2. Double-click the *.UEFI.zip to extract its files.

   

3. Copy UefiFlash.efi and the .bio file to the bootable USB device.
4. Connect the USB drive to a port on the Intel NUC.
5. Configure the BIOS of the target computer to boot to the EFI Shell:
   1. Press F2 during start to enter BIOS setup.
   2. Go to Advanced > Boot > Secure Boot.
   3. Disable Secure Boot, if enabled.
   4. Go to Advanced > Boot > Boot Configuration.
   5. In the Boot Devices pane, enable Internal UEFI Shell.
   6. Press F10 to save changes and exit BIOS Setup.
6. Press F10 during start to open the Boot Menu.
7. Select UEFI: Built-in EFI Shell.
8. Change the current directory to the USB flash drive by entering the command fsX: where X is the drive number of the USB flash drive from the device mapping list. Example: if your USB drive is fs3, then type fs3: and press Enter.
9. At the command prompt, type UefiFlash.efi XXX.bio, where XXX.bio is the filename of the .bio file and press Enter.

   

10. Press Y to begin the update.
11. Wait for the BIOS update to complete.

    

12. The computer will restart when finished.
13. Set the BIOS back to original settings:
    1. Restart the computer.
    2. Press F2 during start to enter BIOS setup.
    3. Go to Advanced > Boot > Boot Configuration.
    4. In the Boot Devices pane, disable Internal UEFI Shell.
    5. Go to Advanced > Boot > Secure Boot.
    6. Enable Secure Boot, if it was originally enabled.
    7. Press F10 to save changes and exit BIOS Setup.

In the unlikely event that a BIOS update is interrupted, it's possible the BIOS may be left in an unusable state. Please follow the instructions and/or watch the video below.

WARNING: This process is intended to be performed by a trained technician.

1. Download the Recovery BIOS (.bio) file. Example:

   

2. Copy the recovery file (*.bio) to a USB device.
3. Plug the device into a USB port of the target computer when it's turned OFF.
4. Press and hold the power button down for 3 seconds, then release it. The Power Button menu appears.

   

5. Press F4 to start the BIOS recovery.
6. Wait 2-5 minutes for the recovery process to complete.

   

7. The computer will either turn off when the recovery process is complete, or it will prompt you to turn it off.

BIOS recovery using the BIOS security jumper will clear Trusted Platform Module (TPM) keys, Intel® Platform Trust Technology (Intel® PTT) keys, and High-bandwidth Digital Content Protection (HDCP) keys. These keys won't be restored after the BIOS recovery.

In the unlikely event that a BIOS update is interrupted, it's possible the BIOS may be left in an unusable state. Please follow the instructions and/or watch the video below.

1. Download the Recovery BIOS (.bio) file. Example:

   

2. Copy the recovery file (*.bio) to a USB device.
3. Shut down the computer and unplug the AC power adapter.
4. Open the chassis and remove the BIOS security jumper. (See the Technical Product Specification for details including the location of this jumper.)

   

5. Plug the USB device into a USB port of the target computer and turn it on.
6. Wait 2-5 minutes for the recovery process to complete.
7. The computer will either turn off when the recovery process is complete, or it will prompt you to turn it off.
8. Remove the USB device.
9. Replace the BIOS security jumper.
10. Close the chassis.
11. Restart the computer.

Runs the Express BIOS update from a batch file without the need for user intervention. This is useful for remote BIOS updates when user interaction is not desired.

1. Download the Express BIOS update file (.EB.msi) for your Intel NUC. Example:

   

2. Download and install any utility (such as 7-Zip) that allows you to extract files from an .msi file.

   

3. Extract files to a folder.
4. Open a text editor such as Notepad to create a batch file that contains only the following two lines:

   DPInst.exe /q /f /se
   Shutdown /r /t 10 /c "Upgrading the BIOS. The computer will reboot in 10 seconds" /f /d p:0:0

   Command line switch notes

   DPInst.exe
   /q	Sets the quietInstall flag to ON, which suppresses the display of wizard pages, user dialog boxes, and other user messages that DPInst and Windows generate.
   /f	Sets the forceIfDriverIsNotBetter flag to ON, which configures DPInst to install a driver on a device even if the driver that is currently installed on the device is a better match than the new driver.
   /se	Sets the suppressEulaPage flag to ON, which configures DPInst to suppress the display of a EULA page.
   Shutdown
   /r	Restarts the computer after shutdown.
   /t xx	Sets the time-out period or delay to XXX seconds before a restart or shutdown. This causes a warning to display on the local console. You can specify 0-600 seconds. If you don't use /t, the time-out period is 30 seconds by default.
   /c "comments"	Enables you to comment in detail about the reason for the shutdown. You must first provide a reason by using the /d option. You must enclose comments in quotation marks. You can use a maximum of 511 characters.
   /f	Forces running applications to close without warning users. Caution: Using the /f option might result in loss of unsaved data.
   /d p:0:0	Lists the reason for the system restart or shutdown. The value p indicates that the restart or shutdown is planned.

5. Save the batch file:
   • Save it to the same folder as the extracted files.
   • The file extension must be .bat.
   • Save the file as type All Files (*.*).

     

   • Copy the folder with all files to the target Intel NUC.
   • Open a Command Prompt in Administrator mode (PowerShell isn't supported):
     1. Click the Windows button and type Command Prompt.
     2. Right-click on Command Prompt and select Run as Administrator.
   • In the Command window, navigate to the folder containing the BIOS update files and the .bat file.
   • Type the complete .bat file name and press Enter to launch the update process.
   • Windows restarts and the BIOS update process begins.
   • After the update is complete, the system starts Windows.