GENERALIO16

This register is used to control the peripherals connected to i2c0_scl Only reset by a cold reset (ignores warm reset). NOTE: These registers should not be modified after IO configuration.There is no support for dynamically changing the Pin Mux selections.
Module Instance Base Address Register Address
sysmgr 0xFFD08000 0xFFD084C0

Offset: 0x4C0

Access: RW

Important: To prevent indeterminate system behavior, reserved areas of memory must not be accessed by software or hardware. Any area of the memory map that is not explicitly defined as a register space or accessible memory is considered reserved.
Bit Fields
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16

Reserved

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

Reserved

sel

RW 0x0

GENERALIO16 Fields

Bit Name Description Access Reset
1:0 sel
Select peripheral signals connected i2c0_scl.
Value Description
0x0 Pin is connected to GPIO/LoanIO number 64.
0x1 Pin is connected to Peripheral signal SPIM1.MOSI.
0x2 Pin is connected to Peripheral signal UART1.TX.
0x3 Pin is connected to Peripheral signal I2C0.SCL.
RW 0x0