Windows Embedded Standard* 7 (WES7) Installation Guide for Intel® Atom™ Processor-based Systems
Please read Notices and Disclaimers before using this guide.
This guide will use a Windows Embedded Standard* 7 (WES7) installation disc from Microsoft. WES7 can also be installed from an image on another hard drive or USB drive. The user needs to have their own licensed version of Windows Embedded System 7 operating system.
- Configure your BIOS to boot first from your optical drive, then boot from your WES7 disc.
Select “Build an Image.”
Accept the license agreement, and the “Choose how to create your image” screen is displayed:
- Each image has a different set of features enabled for its intended application. Choose “Application Compatibility” to install all Windows Embedded Standard 7 features.
- The next screen reviews the drivers and features that will be installed, as determined by the image you selected. You can add or remove features at this point, and the required disk space (displayed on the bottom right) reflects these changes.
Select where to install WES7:
- If WES7 is the only operating system you want to install on this disk, format the disk and create a new partition of the maximum possible size. This erases all data currently on the disk.
- If you are installing WES7 alongside another operating system, select one of the available partitions. If the partition shows 0.0 MB of available, it is likely not formatted in a Windows*-compatible file system (for example, EXT file systems which are commonly used with Linux are not compatible.) In this case, select the partition and format it.
WES7 is now installed. This procedure takes approximately 1.5 hours, depending on your hardware.
Hỗ trợ Intel® EDC
Nhận trợ giúp kỹ thuật và kinh doanh, đăng ký một tài khoản EDC hoặc quản lý tài khoản của bạn.Liên hệ với chúng tôi >
Explore Intel's past, present, and future embedded processors and chipsets.
Processor and chipset selection, peripheral devices, board size, power budget, and thermal analysis.
Schematic Review Service
Submit your design schematic, and we will analyze it for compliance to guidelines and report potential issues within one week.
Hardware Test Tool Loan Program
Provides debug and validation tools, including instructional videos, for supported products on a temporary loan basis.
The Design-In Tools store allows you to speed through motherboard and system design with validation tools and services available for purchase from Intel.